Start by drawing out your pattern or use the one we have provided and scale it up to size. Place the unicorn head piece on top of two layers of fleece and cut around the template leaving a 1.5cm seam allowance all the way around. Do the same for the ears and horn, making sure you cut two extra ear pieces from a pretty colour of felt to make the inside of the ears. Stitch all the way around your head shape leaving the bottom open and snip into the seam allowance at all the curves. Next, fold over the horn, pin down the straight edge and stitch it down to make a cone. Also stitch the ears leaving the flat edge at the bottom open, then turn everything right side out.
Next, take a square scrap of fleece and a handful of stuffing and make a ball on the end of your stick by wrapping some thread around the base, I have used an old fabric pole, ask at your local fabric shop if they have any spares you can have, or head to a DIY store and pick up some dowelling. Start to stuff your unicorn head until you reach the bend at the top of the head then insert your pole. Continue to stuff down the neck until you are about 7-9 cm from the base of the neck. Take some strong thread and stitch around the neck pulling it in tight at the base, wrap some pretty ribbon around to cover the stitching and to help keep it in place on your pole.
Next you are going to make the mane. Layer up your three colours of fleece strips and pin them together along the centre. Stitch all the way down the centre of the strips. Take your super sharp scissors and start to snip the strips all the way along both sides leaving 1.5 cm between the end of your cut and the centre line of stitching. You should end up with a lovely fleecy hair do for your unicorn.
Stitch the mane to the base of the neck and tack it in place along the neck seam until you get to the forehead of your unicorn, then fold it back on itself and carry on tacking it on until you reach the end of your mane piece.
It should look a little bit like a horse now, so it is time to make the horn. Take the cone you stitched earlier and stuff it. Stitch up the bottom of the cone with some strong thread and without cutting the thread take it and wrap it up and around the cone, pulling it tightly to create the spiral up the horn. Finish off by stitching through the tip of the horn and tying off your thread.
Fold the ears in half and taking your strong thread again, stitch them to the head either side of the mane, then stitch around the base of the horn. Lastly take a scrap of black felt and cut yourself some cute eyelashes and stitch or glue them onto the unicorn's face.
download our PDF) scale it up and use it for your own template.
We would love to see what gifts you are making for your loved ones this year, link in the comments or #livelovemake on Instagram or twitter to show us your goodies.
Bloglovin / Twitter / Facebook / Pinterest / Google+ / Instagram